Gorman-Rupp Pumps U4B65S-B 1298951 and up - Manual (Page 7)

SUPER U SERIES OM-05667
PAGE A - 2 SAFETY
This pump is designed to pump materi­
als which could cause serious illness or
injury through direct exposure or
emitted fumes. Wear protective cloth­
ing, such as rubber gloves, face mask,
and rubber apron, as necessary before
disassembling the pump or piping.
Never run this pump backwards. Be cer­
tain that rotation is correct before fully
engaging the pump.
Death or serious personal injury and
damage to the pump or components
can occur if proper lifting procedures
are not observed. Make certain that
hoists, chains, slings or cables are in
good working condition and of suffi­
cient capacity and that they are posi­
tioned so that loads will be balanced
and the pump or components will not be
damaged when lifting. Suction and dis­
charge hoses and piping must be re­
moved from the pump before lifting. Lift
the pump or component only as high as
necessary and keep personnel away
from suspended objects.