Gorman-Rupp Pumps 112G60-B 1214462 and up - Manual (Page 35)

10 SERIES OM−05174
MAINTENANCE & REPAIR PAGE E − 12
cant regularly for evidence of rust or mois-
ture condensation. This is especially im-
portant in areas where variable hot and
cold temperatures are common.
For cold weather operation, consult the factory or a
lubricant supplier for the recommended grade of
oil.
Seal Assembly
Check the seal lubricant before starting the pump
and periodically during operation. Fill the bottler
oiler with SAE No. 30 non-detergent oil. Check the
oil level regularly and maintain it at the level indi-
cated on the bottle oiler.
Periodically clean and reinstall the seal cavity air
vent (27).
Power Source
Consult the literature supplied with the power
source, or contact your local power source repre-
sentative.