Gorman-Rupp Pumps 16A22-B 1068713 and up User Manual
Page 15
Advertising
10 SERIES
OM−00711−04
PAGE B − 9
INSTALLATION
they will slip; if the belts are too tight, there will be
excessive power loss and possible bearing failure.
Select pulleys that will match the proper speed ra-
tio; overspeeding the pump may damage both
pump and power source.
Do not operate the pump without the
guard in place over the rotating parts.
Exposed rotating parts can catch cloth-
ing, fingers, or tools, causing severe in-
jury to personnel.
Advertising