Gorman-Rupp Pumps T3A61S-B /F,/FM User Manual
Page 20
Advertising
SUPER T SERIES
OM-05264
OPERATION
PAGE C - 4
to operate properly. Make certain that the bearing
lubricant is of the proper viscosity and at the cor
rect level (see LUBRICATION in MAINTENANCE
AND REPAIR). Bearing overheating can also be
caused by shaft misalignment and/or excessive vi
bration.
When pumps are first started, the bearings may
seem to run at temperatures above normal. Con
tinued operation should bring the temperatures
down to normal levels.
Advertising