AEG SKS51040S0 - Manual (Page 41)

11. Remove the brackets and mark a dis-
tance of 8 mm from the outer edge of
the door where the nail must be fitted
(K).
12. Place the small square on the guide
again and fix it with the screws sup-
plied.
Align the kitchen furniture door and the
appliance door by adjusting the part Hb.
13. Press the part (Hd) on the part (Hb).
Do a final check to make sure that:
• All screws are tightened.
• The sealing strip is attached tightly to the
cabinet.
• The door opens and closes correctly.
Ha
K
8 mm
Hb
Hb
Hd
Installation 41