Gorman-Rupp Pumps PA6C60C-B-E50 460/3 1528569 and up - Manual (Page 8)

PA SERIES OM-06531
PAGE A - 3 SAFETY
discharge valve is acceptable only
when required for startup or shutdown
procedures.
Do not remove plates, covers, gauges,
pipe plugs, or fittings from an over­
heated pump. Vapor pressure within the
pump can cause parts being disen­
gaged to be ejected with great force. Al­
low the pump to cool completely before
servicing.
Do not operate the pump without guards
in place over the rotating parts. Ex­
posed rotating parts can catch clothing,
fingers or tools, causing severe injury to
personnel.
Pumps and related equipment must be in­
stalled and operated according to all na­
tional, local and industry standards.
Make sure the pump is level. Lower jack
stands and chock the wheels, if so
equipped.