Gorman-Rupp Pumps SF4C 1528832 and up - Manual (Page 14)

SF SERIES OM-06511
PAGE C - 1 OPERATION
OPERATION - SECTION C
GENERAL INFORMATION
Review all SAFETY information in Section A.
This pump is designed to handle most
non‐volatile, non‐flammable liquids. Do
not attempt to pump any liquids for
which your pump is not approved, or
which may damage the pump or endan­
ger personnel as a result of pump fail­
ure. Consult the factory for specific ap­
plication data.
Follow the instructions on all tags, labels and de­
cals attached to the pump.
Pump Performance
Since operation of the pump motor is de­
pendent upon the quality and performance
of the electrical controls, the pump warran­
ty is valid only when controls have been
specified or provided by The Gorman‐
Rupp Company.
In the performance curve which follows, perform­
ance is based on 70 _F (21_C) clear water at sea
level. The performance of your pump may be differ­
ent due to such factors as viscosity, specific grav­
ity, elevation, temperature and impeller trim.
NOTE
The curve applies to standard production models.
If your pump serial number is followed by an “N”,
your pump is not a standard production model.
Contact the Gorman‐Rupp Company to verify per­
formance.