ANKER USB 3.0 Dual Display (DVI/HDMI) Docking Station, Audio, Gigabit Ethernet, and 6 USB ports for Windows - Manual (Page 11)

- 8 -
Behavior upon first connection:
When the USB Display Dock is connected, the firmware version will be checked by
the host’s software. If they do not match, the firmware on the device will be
updated. While the firmware is updating, a window similar to that shown below will
pop up.
When the USB Display Dock is attached, an icon will appear in the taskbar. This
gives you access to the DisplayLink Manager Menu.
From the taskbar, click the “Show hidden icons” arrow to show all available
icons.
To use the DisplayLink Manager Menu:
Controlling the Display
Configuring Displays
3. Using the USB Display Dock
1.