Liberty Pumps Engineered Pump Systems (EPS) - Manual

©Copyright 2014 Liberty Pumps Inc. All rights reserved 1
IMPORTANT:
Prior to installation, record Model, Serial Number, and
Code Number from pump nameplate for future reference.
MODEL ________________________
SERIAL ______________________
CODE ______________________
INSTALLATION
DATE _______________________
Installation Manual
7298000B
Manual Contents:
1. General Information
2. Precautions / Pre-Installation
3. Installation Instructions
4. Maintenance & Troubleshooting
5. Guide rail Assembly
Engineered Pump Systems (EPS)
7000 Apple Tree Avenue
Bergen, NY 14416
Phone: (800) 543-2550
Fax: (585) 494-1839
www.libertypumps.com
By definition, an EPS system is a custom product and some differences in materials, pumps, and
design are unavoidable. This manual is intended as a generic guideline only. Any specific questions
should be directed to Technical Customer Service Department at the Liberty Pumps Factory
(PH: 1-800-543-2550, E:
[email protected] )
Common Components:
 Fiberglass Tank
 Sump, Effluent, Sewage or Grinder Pump(s)
 Factory Installed Guide Rail System
 Pre-mounted float system
 NEMA 4X Junction Box
 Inlet hub
 Control Panel or Alarm System