Elmo Rietschle G-BH1 Extra instruction manual - Manual (Page 8)

Declaration of Conformity
610.44479.40.000 8 / 12 © Gardner Denver Deutschland GmbH
Declaration of Conformity
EU declaration of conformity
Manufacturer: Gardner Denver Deutschland GmbH
P.O. Box 1510
D-97605 Bad Neustadt / Saale
Responsible for documentation: Holger Krause
P.O. Box 1510
D-97605 Bad Neustadt / Saale
G-Series Side channel blower
G-BH1
Designation:
Types 2BH1 1..-7.D..-Z
2BH1 2..-7.D..-Z
2BH1 3..-7.D..-Z
2BH1 4..-7.D..-Z
2BH1 5..-7.D..-Z
2BH1 6..-7.D..-Z
2BH1 8..-7.D..-Z
2BH1 9..-7.D..-Z
2BH1 1..-7.G..-Z
2BH1 2..-7.G..-Z
2BH1 3..-7.G..-Z
2BH1 4..-7.G..-Z
2BH1 5..-7.G..-Z
2BH1 6..-7.G..-Z
2BH1 8..-7.G..-Z
2BH1 9..-7.G..-Z
The side-channel compressor described above with motor fitted as per the EC declaration of conformity issued
by Siemens complies with the following applicable Community harmonisation legislation:
94/9/EC Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the
approximation of the laws of the Member States concerning equipment and protective systems
intended for use in potentially explosive atmospheres
II 3G c T2, T3 or T4
II 3/2G c T2, T3 or T4
II 3D c T125°C
II 3/2D c T125°C
2006/42/EC Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery,
and amending Directive 95/16/EC
The protection targets of the directive 2006/95/EC have been met
Harmonised standards applied:
EN 1012-1:1996 Compressors and vacuum pumps — Safety requirements — Part 1: Compressors
EN 1012-2:1996 Compressors and vacuum pumps — Safety requirements — Part 2: Vacuum pumps
EN 1127-1:2007 atmospheres — Explosion prevention and protection —
Part 1: Basic concepts and methodology
EN 13463-1:2001 Non-electrical equipment for potentially explosive atmospheres —
Part 1: Basic method and requirements
EN 13463-5:2003 Non-electrical equipment intended for use in potentially explosive atmospheres —
Part 5: Protection by constructional safety "c"
EN 13463-6:2005 Non-electrical equipment for use in potentially explosive atmospheres —
Part 6: Protection by control of ignition source "b"
The technical documentation is stored at the notified body DEKRA EXAM GmbH, no. 0158 under certification
number BVS 03 ATEX H/B 070.
Bad Neustadt/Saale, 29.12.2009
(Place and date of issue)
ppa. Fred Bornschlegl
(Name and function) (Signature)
664.xxxxx.40.000