AAEON RTC-700T - Manual (Page 31)

R u g g e d T a b l e t C o m p u t e r R T C - 7 0 0 T
Chapter 3 Power Management 3 - 4
Low Battery Alarms
RTC warns you when your battery charge reaches low, reserve,
and critical levels. When the charge gets low, the battery icon in the
notification area indicated a low-battery level. When your battery
charge reaches the reserve level, RTC notifies you that you’re
running on reserve power. At the point, you need to save your work,
and then find an alternate power source or stop using the RTC.
When your battery is almost out of power, the battery icon indicates
a critical-battery level, and then your RTC goes into hibernation.
If you don’t have enough time to act after seeing the low and
reserve battery notification, you can increase the percentage of
battery remaining for these settings. This can be especially useful
for older batteries, which might not have as much storage capacity.
How to change Low, Reserve, and Critical power levels on RTC’s
battery condition.
1. Star / Control Panel / Hardware and Sounds / Power Options /
2. On the Select a power plan page, next to the plan you want to
change, click “Change plan settings”.
3. On the Change settings for the plan page, click “Change
advanced power settings”.
4. On the Advanced settings tab, expand battery; expand Low
battery level, Reserve battery level, and Critical battery level.