AAEON ACD-515R - Manual (Page 25)

R e m o t e T o u c h D i s p l a y A C D - 5 1 5 R
Chapter 2 Hardware Installation 2-7
will cause compatibility issues.
Operation:
The button event is triggered correctly at the remote display side, when
system is setup correctly for one-to-multiple. The selected EDID will be
update to Host Side EEPROM (HU7).
The same operation applies for Loopback EDID. In the system setup, the
last EDID updated will stay in the EEPROM. If customers setup this button
even many times, the last one triggered will be applied.
2.6 DIP Switch
The function of DIP switch is to make ACG-203 and remote displays in the
same group. When users want to send the data from the ACG-203 to
several remote displays (ACD-515R), they have to use the DIP switch to
set ACG-203 and ACD-515R the same group.
ACD-515R