AAEON AGD-317R - Manual (Page 28)

R e m o t e T o u c h D i s p l a y A G D - 3 1 7 R
Chapter 2 Hardware Installation 2-10
*3: Engineering mode:
(1)Static IP: 192.168.0.88
(2)User can connect to http://192.168.0.88 webpage for firmware
update.
(3) Firmware update file name will be: webfwc.bin
*4: Engineering mode:
(1) Reset Any change in SPI flash setup flag.
(2) Re-generate Random MAC to avoid any possible MAC collision.
After Reset to Default and reboot cycle, a new random MAC will be
generated.
*5: Update EDID:
The feature is used for one-to-multiple Mode to select which monitor/TV
EDID is used for system wide EDID usage. During one-to-multiple setup,
there may be monitor/TV that has lower resolution. For example, 1
monitor/TV with 720p resolution with mostly 1080p solutions. Please select
the monitor/TV with lowest resolution, to ensure all can be displayed
correctly. For customers who are using 1 pair of Host/Client with
one-to-multiple mode, the end user has to update EDID correctly. If not, it
will cause compatibility issues.
Operation:
The button event is triggered correctly at the remote display side, when
system is setup correctly for one-to-multiple. The selected EDID will be
update to Host Side EEPROM (HU7).
The same operation applies for Loopback EDID. In the system setup, the
last EDID updated will stay in the EEPROM. If customers setup this button
even many times, the last one triggered will be applied.