AAEON PICO-CV01 User Manual
Page 93
Advertising
P I C O - I T X B o a r d
P I C O - C V 0 1
Appendix D AHCI Settings
D-2
D.1 Setting AHCI
OS installation to SETUP AHCI Mode
Step 1: Copy below files from “Driver CD -> Step3 - AHCI\WinXP_32” and
to diskette.
Step 2: Connect the USB Floppy drive to the board and insert the diskette
from previous step.
Step 3: Configure SATA Controller to RAID mode in BIOS SETUP Menu:
Advanced -> IDE Configuration -> SATA Mode -> AHCI Mode
Advertising