ABUS FUMK50020 Secvest Mini Wireless Magnetic Contact Detector - Manual (Page 15)

– 14 – – 15 –
4. Registering the detector into zones:

!
See relevant device information.
Press the tamper switch (anti-
removal wall contact) until the
receiver confirms it has received a
signal by a beep.
3. operation:
Attention!
observe the polarity!
Insert the battery into the
wireless opening detector.
5. Range:
The range depends on environmental conditions. Check the detector is
communicating with the alarm centre before installation.
GB
MoAnLtg. Mini-Funk-Oeffnungsmelder_100x90mm_NEU.indd 15 20.04.12 08:54