ABUS FU8100 Secvest 2WAY Wireless Remote Control - Manual (Page 15)

15
Learning
In the Secvest user menu, select a user to be allocated to
the remote control. Carry out the steps detailed in the
installation instructions of the wireless alarm centre to start
the learning process.
Programming
To find out how to program the free button on the remote
control (default setting: activate partition), consult the
relevant system descriptions of your alarm centre.
Changing the battery
Open the battery compartment on the rear of the remote
control. Remove the empty battery and replace it with one
of the same type (CR 2450, Li-Mn 3 V). Close the
compartment again.