ABUS FU9001 Privest Wireless Alarm Base Set Installation - Manual (Page 71)

7-71
7.8.2
88 22
Communication Test
Under Communication Test you test the radio communication between your wireless operating panel and the system.
To access the Communication test menu:
1. Select the Keypads menu as described above.
2. Under Keypads, press
22
to access the Communication test menu option. You see the following on the
display:
3. Press or to select the wireless operating panel you want to test.
4. Press the activation button on the wireless operating panel. The display shows the strength of the received
signal.
NOTE:
For successful transmission, the signal strength should be higher than the noise level of the receiver. (See also page
7-30.)
Press to exit the menu option.