ABUS FU9080 Privest Wireless Outdoor Siren - Manual (Page 15)

15
Installing the external sounder
1) Remove the screws on both sides of the external wireless sounder and open the cover
of the sounder upwards.
2) Using the base plate as a drilling template, mark the drill holes on the wall. Drill the
holes and insert the wall plugs.
3) Fix the sounder to the wall
4) Insert batteries supplied.
5) The external sounder is now ready to be trained for the ABUS wireless alarm system.
6) After the sounder is trained, close the lid and lock it with the screws on the side.
Speaker & Strobe
Batteries
(6V, Serial
Connection)
Speaker
Strobe
LEDS
Two Indication
LEDs
Reset Switch
S
P
E
A
K
E
R
T
A
M
P
E
R
Radio Batteries
(3V, Parallel
Connection)
External Sounder - PCB Diagram