ABUS TVCC35510 User Manual
Page 23
23
6.3 Camera module adjustment
The camera module can be adjusted in 3 axis. The adjustment of the third axis often will be used on
wall mount of the camera. The module rotation (1
st
and 3
rd
axis) must not be performed more than
360 degree.
Pan (1st axis)
Tilt (2nd axis)
Rotation (3rd axis)
6.4 Fokus- und Zoomeinstellung
The cameras TVCC35010 and TVCC35510 are
equipped with a vario focal lens. On the bottom side of
the lens two adjustment handles for focus and zoom
ratio are positioned. The handles additionally act as a
fixing screw for the focus and zoom adjustment.
The fixing handles can be rotated anti-clockwise for defixing. Please perfom this with care to
prevent the handles falling off the lens. Now please adjust zoom ratio and focus. Afterwards fix the
handles by rotating clockwise.
Function
Description / Option
Zoom ratio adjustment
WIDE – Viewing angle wide, Zoom 0x (max.)
TELE – Viewing angle narrow, Zoom 3.75x (max.)
Focus adjustment
FAR – Focus far
NEAR – Focus near