ABUS TVAC10100 User Manual
Page 24
24
English
5.2. Description of the connectors
6. Menu
6.1. Menu guidance
MENU
• Starting the OSD (on-screen display)
• Opening
sub
menus
• Selecting a menu item for editing
• Confirming a selected value
▲▼
• Switching between menu items
◄►
• Setting the values
c
ISP interface
Interface for firmware updates
d
Power switch
Turning the monitor on or off.
e
Voltage DC 9V
Power supply socket for charging the integrated battery. Please use
only the included power supply.
f
Cable interface
Continuity tester
With this terminal you can test 2 cables for continuity at the same
time.
g
PTZ interface
Speed dome protocol test for RS485 +/- interfaces Pelco D and P
protocol
h
RS-232 interface
Service interface
i
Video connection
Socket for AV adapter cable
j
Socket for sensor tip
+ sensor tip for AC / DC voltage measurement
k
Socket for sensor tip
- sensor tip for AC / DC voltage measurement
c
d e f g h i
G Rx Tx 5V
G + -
Cable 1
Cable 2
j
k