ABUS TV8760 - Manual (Page 15)

15
Attention: Please comply with the following instructions if you are using CAT5 STP cable.
If you use RJ-45-Jack with metal housing, the shield from the connection cable has to be connected with the metal housing.
Using RJ-45-Jack with plastic housing needs essentialy grounding with the housing of the transmitter/receiver. Therefore connect the
shielding from the cable with the screw of the D-SUB from the transmission system.
Ground cable: Must touch the metal housing
Connector: STP RJ 45
Housing : Metal
Connector: STP RJ 45
Housing : plastic