ABUS TVIP32500 - Manual (Page 70)

70
3.2 Installing the camera
First remove the white dome ring by turning it
counterclockwise, then remove the dome.
On the underside of the camera base plate, there are three
openings for the mount which go all the way through (see
figure on the right, 1/2/3).
Hold the camera at the intended installation location, mark
the mounting holes on the surface, and drill the holes. Use
the installation material provided to fasten the camera in
place.
The camera module can be tilted and rotated in three axes.
Pan:
Rotation of the entire camera module
Tilt:
Tilting of the camera module
Rotation:
Rotation of the lens with image sensor and
IR PCB (third axis)
IMPORTANT!
The camera must be disconnected from the power supply during installation.
1
2
3