Installation, 1 replacing the lamp, 2 closing the door – AEG A92708GNW0 User Manual

Page 31: 1 positioning

Advertising
background image

Problem

Possible cause

Solution

The door has been open
to long.

Close the door.

Door interferes with
ventilation grill.

The appliance is not lev-
elled.

Refer to "Levelling".

Misaligned door.

The appliance is not lev-
elled.

Refer to "Levelling".

As much as the advice does not lead to result, call the nearest brand-mark service.

6.1 Replacing the lamp

The appliance is equipped with a long-
life LED light.
Only service is allowed to replace the
lighting device. Contact your Service
Center.

6.2 Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer
to "Installation".

3.

If necessary, replace the defective
door gaskets. Contact the Service
Center.

7. INSTALLATION

WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.

7.1 Positioning

Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:

Cli-
mate
class

Ambient temperature

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

ENGLISH

31

Advertising
This manual is related to the following products: