Alera Lighting QST Parabolic Louver - Manual (Page 2)

© 2010 Alera Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Alera Lighting reserves the right to change specifications
without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Tech Support 864.678.1580 / Website www.aleralighting.com
Page 2/2 Rev. 07/23/10 CuRveS / Quest Parabolic louver
Quest Parabolic louver tiD
technical installation Data
Step 4
Bring louver across fixture and snap onto opposite side of the fixture
housing.
Step 5
Leave approximately 1/2" gap between louvers as shown. Slide aligners
to cover joints between louvers.
Step 6
Be sure that louver fits into rib on end-of-row end cap.