Alera Lighting MS6 - Wall Mount - Manual (Page 2)

© 2009 Alera Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Alera Lighting reserves the right to change specifications
without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Tech Support 864.678.1580 / Website www.aleralighting.com
Page 2/2 Rev. 12/21/09 BeAMS / MS6 WM TID
MS6 Wall Mount
Technical Installation Data
4 3/8" bottom of
fixture to center
of wall bracket
Install 2" wide brace fixture housing.
Secure with washers and nuts provided.
Screws are pre-set in bracket
2 3/4" center to center
Secure bracket to
j-box or wall with
fasteners by others
4 1/2" square canopy
7 3/4"
3/4"
Housing
Light seal
Light seal to inside
of both housings
Screws supplied
with light seals
Housing
Light seal
Nuts supplied with
light seals