Alera Lighting S6 Wall Mount - Manual (Page 2)

© 2009 Alera Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Alera Lighting reserves the right to change specifications
without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Tech Support 864.678.1580 / Website www.aleralighting.com
Page 2/2 Rev. 11/30/09 BeAMS / S6 WM TID
s6 Wall Mount
Technical Installation Data
3" bottom of
fixture to center
of wall bracket
6"
Screws are pre-set
in bracket
3/4"
Install 2" wide brace inside fixture housing.
Secure with washers and nuts provided.
4 1/2" square copy
2 3/4" center to center
Secure bracket to
j-box or wall with
fasteners by others
Nuts supplied with
end of row end cap
End of row end cap
Bolts welded to
inside of end cap
Housing
All end cap flanges
to inside of housing