Alera Lighting S8 - Wall Mount - Manual (Page 2)

Page 2/2 Rev. 09/10/13 Beams / S8 WM TID
s8 Wall Mount
Technical Installation Data
© 2013 Alera Lighting, a division of Hubbell Lighting, Inc. Alera Lighting reserves the right to change specifications without notice.
701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com
3" bottom of
fixture to center
of wall bracket
6"
Screws are pre-set
in bracket
3/4"
Install 2" wide brace inside fixture housing.
Secure with washers and nuts provided.
4 1/2" square copy
2 3/4" center to center
Secure bracket to
j-box or wall with
fasteners by others
Nuts supplied with
end of row end cap
End of row end cap
Bolts welded to
inside of end cap
Housing
All end cap flanges
to inside of housing