Alpha Technologies Fiber Backhaul Enclosure (FBE) - Manual (Page 12)

12
2.0 Installation
021-081-B0-001 Rev. A
Remove the lifting ears after installation. The ears are made of steel and may rust over time.
NOTE:
Do not lift the enclosure with the equipment or batteries in place. Ensure load capacity of lifting
equipment is rated for the weight of the Fiber Backhaul Enclosure.
CAUTION!
2.1 Lifting
Attach the lifting chain to the eyebolts located in the top of the enclosure. Verify the adjustable chain
links are tightened securely. Also verify the length of the cable between the eyebolts and the lifting
hook (2d) is at least twice the distance (d) between the lifting eyebolts and the lifting angle of the
chain is greater than or equal to 60 degrees.
Fig. 2-1, Enclosure Lifting Arrangement
DX
2
D
Do not allow personnel to walk beneath the suspended unit during the lifting operation. Use
steel-toe work shoe protection. Use "hard hats" at all times during this procedure.
WARNING!