Alpha Technologies FBE2322 Enclosure System - Manual (Page 20)

20 031-314-B0-001, Rev. A (12/2012)
2.0 Installation, continued
2.5 Enclosure Installation, Pole Mounting, continued
2.5.1 Wooden Pole, continued
5. Secure the brackets to the pole using the 5/8" (16mm) machine bolts, washers, and nuts.
6. Lift the enclosure onto the brackets. It might be necessary to rock and pull the enclosure to
properly seat it on the brackets.
7. Secure the enclosure to the brackets using the 3/8"x 3/4" hex bolts.
8. Make sure all nuts and bolts are fully tightened and the flanges of the brackets seat in the
wood.
9. The enclosure is now ready for grounding (see Page 26) and equipment installation.
Fig. 2-6, FBE2322 Series Wooden Pole Mounting
Pole Mount Brackets
p/n 744-670-20
Enclosure Pole Mount Straps
p/n 746-205-20
Enclosure Ground
Cable
Nut & Washer
Nut & Washer
18" (457.2mm)
5/8" (16mm) Bolts