Alpha Technologies Cordex 48-1.2kW - Manual (Page 49)

Specifications for Alpha Cordex 48-1.2kW 19" 1RU Shelf System, Bulk Power
Alpha Technologies Ltd. 030-845-B1 Rev A
Printed in Canada. © 2011 Alpha Technologies Ltd. ALPHA and CORDEX are trademarks of Alpha Technologies Ltd. All Rights Reserved.
Basic Unit, Shelf
Maximum Output: 125A, 58Vdc
Recommended Feeder Breaker
Single Phase: 120V, 15A, #14 AWG (per individual feed of two rectifiers)
240V, 20A, #12 AWG (per individual feed of two rectifiers)
Mechanical
Dimensions: 44mm H x 439.5mm W x 305mm D (rectifier front panel 12.5mm D)
[1.75" H x 17.3" W x 12" D (rectifier front panel 0.49" D)]
Mounting*: 19" or 23" rack, center (5" or 6") or flush, EIA rack spacing
Weight: 3.0 kg (6.6 lb.)
Connections
AC Input: Up to three IEC-60320-C20 MAIC connectors
(for use with IEC-60320-C19 female line cords)
Chassis ground: Via rack through mounting brackets and AC cords
Communications: CAN (bus, dual in/out) RJ-12 offset (female)
DC Output (bus bars): 7/16" on 1" centers,
may accommodate up to two (2) 3/8"-1"C lugs in a back-to-back orientation
Safety
EN 60950 Rectifier output shall be rated SELV suitable for connection to TNV-1 circuits
UL 60950-1-2002
CSA 60950-1-03
CE EN 60950, CB Scheme
73/23/EEC Low Voltage Directive with amendment 93/68/EEC
Telcordia (Bellcore) GR-1089-CORE (requirements applicable to rectifier)
* See drawings at the rear of this manual.
The above information is valid at the time of publication. Consult factory for up-to-date ordering information.
Specifications are subject to change without notice.