Alpha Technologies BD-8 - Manual (Page 8)

Product Safety
8 031-032-C2-002 Rev. B
C a u t i o n s
NOTE: Enclosure, equipment or parts may be damaged or cause damage if used or
installed improperly.
To avoid damage :
• Prior to installation, verify that the AC input voltage to the enclosure and its equipment match
with respect to voltage and frequency.
• Prior to installation, verify that the output voltage from the enclosure or its equipment match
the voltage requirements of the connected equipment (load).
• Prior to installation, verify that the enclosure’s utility service panel is equipped with a properly
rated circuit breaker for use with the equipment inside. Refer to manufacturer’s
recommendations.
• Review and upgrade utility service panel circuit breaker requirements whenever the equipment
within the enclosure is changed.
• Prior to installation, contact local utilities, local building maintenance departments, and cable/
piping locator services to ensure that installation does not interfere with existing utility or
building cables/piping.
• Do not exceed the output rating of equipment. Verify load requirements prior and during
connection process.
• Prior to handling the batteries, touch a grounded metal object to dissipate any static charge
that may have developed in your body.
General Safety Precautions