A. rail assembly – American Expedition Vehicles Full Rail Kit for JK Roof Rack User Manual
Page 3
Advertising
1
A. Rail Assembly
1. Attach corner close out plate to the bottom of each
corner piece using the supplied screws (Fig. 1).
2. Slide End Rail Feet identified with the part number
M513 into the End Rails (3 each) and the Side
Rail Feet into the Side Rails (4 each) as shown in
Figure 2.
3. Insert corner pieces into the Rails (Fig. 3 #1) and
secure with the supplied screws (Fig. 3 #2).
1
2
Figure 1
Figure 2
Figure 3
Advertising