American Expedition Vehicles JK CORDURA Front Seat Covers - Manual (Page 3)

2
Front Seats
Driver and passenger bottoms
Pull cover into place around seat cushion and
feed the tail flap (A) between bottom cushion and
backrest.
Feed the wide velcro straps (B) under seat and
attach to the tail flap behind the seat.
Feed thin velcro straps (C) under seat, over seat
slide, and secure to the velcro on the tail flap.
Smooth cover over seat with your hands and
refasten velcro to tighten. Trim excess velcro if
desired.
Driver and passenger Backs
Remove headrest and pull cover into position
with velcro straps in front. Cover will be snug,
inch down by pulling at alternating sides to avoid
damaging seams.
Tuck fabric around circular cut-outs (A) under
plastic headrest bezels.
Feed velcro straps (B) between seat cushion and
back rest and attach them to the velcro inside
the back of the seat cover (C).
Smooth cover top to bottom to eliminate wrinkles
and refasten velcro to tighten.
A
A
B
B
C
C
C