Please read before you start – American Expedition Vehicles Moab/Call of Duty Rear Bumper Water Tanks with Pump Kit User Manual
Page 3
Page 3 of 20
PLEASE READ BEFORE YOU START
IN ORDER TO INSTALL THIS PART PROPERLY YOU OR YOUR INSTALLER MUST READ
THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING THE INSTALLATION.
FAILURE TO DO SO MAY RESULT IN MISTAKES AND AFFECT THE QUALITY OF THE
FINISHED PRODUCT.
Included Parts
QTY
REAR BUMPER KIT
Rear Bumper
1
Corner Tanks
2
LH Tank Cap
1
LH Bumper Mounting Bracket
1
Non-Skid Tape
1
Master Hardware Pack
1
TIRE CARRIER KIT
Tire Carrier
1
Spindle Mount
1
Tailgate Bracket
1
Tire Mount
1
Backing Plate
1
Master Hardware Pack
1
TIRE CARRIER DELETE KIT
RH Bumper Mounting Bracket
1
Required Tools
Common Hand Tools
Drill Motor
3/8” Drill Bit
2 ¾” Hole Saw
Reciprocating Air Saw or Cut Off Wheel
File or De-burring Tool
Center Punch
Suggested Tools
Ratcheting Wrench Set