American Expedition Vehicles Preparation of the Jeep body tub - Manual (Page 2)

Page 2 of 15
PLEASE READ BEFORE YOU START
TO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND READING THESE
INSTRUCTIONS THOROUGHLY BEFORE BEGINNING ANY WORK. THESE
INSTRUCTIONS ASSUME A CERTAIN AMOUNT OF MECHANICAL ABILITY AND ARE
NOT WRITTEN OR INTENDED FOR SOMEONE NOT FAMILIAR WITH AUTO BODY
REPAIR.
Required Tools
4” Grinder w/
- 80 Grit Sanding Discs
- Wire Wheel
- Med ScotchBright Pads (Red)
Sawzall with long metal cutting Blade
Drill Motor
Pilot Point Drill Bit (or) Spot Weld Cutter
we recommend:
- DeWalt 27/64 Pilot Point DW1927
Combination Square and Scribe
Tape Measure
Appropriate Safety Equipment
Common Hand Tools
Spring Loaded Center Punch or Equivalent
Thin Stainless Steel Putty Knife
Hammer and Body Dolly
Transfer Punches
File or Die grinder