Associated Equipment 12-1015 Manual - Manual (Page 52)

- 52 -
Model 12-1015 Users’ Manual Version 13.08
Associated Equipment Corp.
5043 Farlin Ave. 800-949-1472(US)
St. Louis, MO 63115 314-385-5178 (Outside US)
Step 4. Now plug the Analyzer into any one of the PC USB port.
Step 5. On the PC, go to desktop display and look for icon.
Left click on the icon to open the program and the display page will
show as below:
Step 6.
Now link up the Analyzer with PC by the following procedures:
1. On the Main Menu page (Fig. 78) below, select Setup Menu by
pressing key to highlight it and then press key.
2. In the Setup Menu display (Fig. 79), press key to highlight
“PC Link” and then press key to activate.
Select Menu
New: Clear Memory
Continue Testing
View last Test
Setup Menu
[Enter] to proceed
Figure 78
Setup Menu
Language
LCD Brightness
Printer
PC Link
[Enter] to proceed.
[Exit] to quit.
Figure 79
Click here to input your
Company name and address.
Click here to select your
preferred language from the
list of languages shown.
It will automatically
detect the COM Port.
If you find that this
field is blank, close
the program, unplug
the analyzer cable
and then plug back
again. Repeat Step 5
to open the program.
The COM Port(s) will
now appear in the
drop down menu.