Atec Agilent-E7495A - Manual (Page 6)

630 Chapter 21
Safety and Regulatory Information and Specifications
E7495A/B Base Station Test Set Specifications
Safety and Regulatory Information
a
n
d
Sp
ecification
s
DC Bias Option 300 (Port 1) E7495B only
DC Voltage: +12.7 VDC maximum
DC Current: 800 mA maximum
Volt-Amps: 9.84 VA maximum
Signal Generator (CW) Option 500 (Port 1)
Frequency range: 375 to 2500 MHz
Output level: –23 to –95 dBm
Level accuracy: ± 1 dB between –25 to –85 dBm
Phase error: At 30 KHz offset –90 dBc/Hz
cdmaOne / cdma2000 Reverse Link Signal Generator Option 510 (port 1)
Frequency range: 375 to 2500 MHz
Output level (E7495A):
Output level (E7495B):
–50 to –95 dBm
–28 to –95 dBm
Level accuracy: ± 1.5 dB (–50 dBm to –90 dBm)
± 2 dB ( > –50 dBm)
Power Meter Option 600
Display
Range:
Limits:
Resolution: –100 dBm to +100 dBm
±
–100 dBm
Settable 1.0, 0.1, 0.01, 0.001 in logarithmic mode or
1, 2, 3, or 4 significant digits in learner mode.
Table 21-2 E7495A/B Base Station Test Set Option Specifications