Atec Acterna-TTC-209OSP - Manual (Page 7)

7
Package descriptions
209OSP-P1
Mainframe, DC Measurements, TDR Measurements,
Repeater Adapter
209OSP-P2
Mainframe, DC Measurements, TDR Measurements,
HDSL/ISDN/DDS Measurements, Repeater Adapter
209OSP-P3
Mainframe, DC Measurements, TDR Measurements,
Channel Monitor, Advanced Stress Patterns,
Enhanced ESF, Smart Loopback/Command Codes,
FT1, Repeater Adapter
209OSP-P4
Mainframe, DC Measurements, TDR Measurements,
Channel Monitor, Advanced Stress Patterns,
Enhanced ESF, Smart Loopback/Command Codes,
FT1, HDSL/ISDN/DDS Measurements, Repeater
Adapter
Ordering information
Mainframe
– 209OSP T-BERD T-Carrier Analyzer
Options
– 209OSP-1 DC Measurements
– 209OSP-2 TDR Measurements
– 209OSP-3 Channel Monitor
– 209OSP-4 Advanced Stress patterns
– 209OSP-5 Enhanced ESF
– 209OSP-6 Smart Loopback/Command Codes
– 209OSP-7 Fractional T1
– 209OSP-8 HDSL/ISDN/DDS Measurements
– 209OSP-96 DLC/DS0 Analyzer Lid
Upgrades
– 209OSP-UPG1 Cable Qualification
– 209OSP-UPG2 Advanced Services/Intelligent
Network Support
– 209OSP-UPG3 HDSL/ISDN/DDS Measurements
– 209OSP-UPG4 HDSL/Advanced Services/
Intelligent Network Support
Accessories
– 41084 T-BERD Repeater Power Supply
– 43141
T-BERD Repeater Power Supply Multiplexer
– 44116 T-BERD HDSL Doubler Power Supply
– 44527 T-BERD HDSL Remote Access Shelf
– 41754 T-BERD Repeater Adapter
– 41157 T-BERD Repeater Extender
– PR-40A Thermal Graphics Printer with
Carrying Case
– 10966 Thermal Printer Paper
– CC-42215 Soft Carrying Case for Outside
Plant Tester
– CC-42632 Soft Carrying Case for Repeater
Power Supply
– CC-OSPLID Soft Carrying Case for Outside
Plant Tester Lid
Technical specifications
Mainframe specifications
Operating modes
– Self Test
– Automatic Configuration
– T1 Unframed
– T1 D4
– T1 ESF
– T1 SLC Framed
– T1 DID Framed
– FT1 D4 Framed*
– FT1 ESF Framed*
– T1 Test Loopback
– T1 Line Loopback
– Repeater Test*
– DC Measurements*
– TDR Measurements*
– HDSL Measurements*
– SMARTNIU Measurements*
Patterns
– All Ones
– 1:1
– 1:7
– 2 in 8
– 3 in 24
– 63*
– 511*
– 2047*
– T1 QRSS
– BRIDGTAP ™
– MULTIPAT ™
– Programmable (3 to 24 bits) (3)
– All Zeroes
– 404, 1004, 2804, 2713 Hz*
– T1-Daly
– T1-2/96*
– T1-3/54*
– T1-4/120*
– T1-5/53*
– 55 Octet*
– MIN/MAX*
Input and output connectors
– WECO 310, T1 Repeater Port,
– 8 pin RS-232, RJ48
Input impedance
– BRIDGE 1000 W with ALBO
– TERM 100 W with ALBO
– DSX-MON 100 W with AGC
Receive level
– BRIDGE or TERM +6 to –35 dBdsx
– DSX-MON +6 to –24 dBdsx
Level measurement
– +6.0 to –40.0 dBdsx,
– +6.0 to –6.0: 0.1 dB resolution
– –6.0 to –40.0: 0.5 db resolution
Frequency measurement
– 1 Hz resolution; 5 ppm accuracy
Transmit timing sources
– Internal Clock
– Recovered Clock
Line codes
– AMI, B8Zs
Loopback codes
– CSU
– CSU Line (ESF)
– CSU Payload (ESF)
– NIU (FAC1, FAC2, FAC3)
– NIU Network (ESF)
– Programmable (3 to 8 bit)
– Intelligent Repeaters*
– HDSL End-Equipment*
DC measurements*
– Resistance 10 W to 10 MW
– Volts DC 0.5 to 400 VDC
– Simplex Current 0 to 200 mA
TDR measurements*
– Pulse Amplitude 10.0 V p-p
– Measurement Range 50 to 10,500 ft
HDSL measurements*
– Loop Loss 0.0 dB to 40.0 dB
– Accuracy ±0.5 dB
– Resolution 0.1 dB
– Loop Length 100 to 20,000 ft
– Capacitance 1500 pF to 323,500 pF
– Power -40.0 to +13.0 dBm
Power
– AC Operating and Charging Power
115 VAC ±10%, 50-60 Hz
– Battery Type Lead Acid
– Battery Operation 5 hours (nominal)
– Battery Charging Time 8 hours (nominal)
Physical characteristics
– Enclosure Dimensions (h x w x d)
7.0 x 13.6 x 7.8 in
(17.8 x 34.5 x 19.8 cm)
– Weight 1.4 lb (5.6 kg)
Operational characteristics
– Battery Operating Temperature. –20 to 50ºC
– AC Operating Temperature –20 to 40ºC
– Storage Temperature –20 to 60ºC
– DLC/DS0 Specifications
*Optional