Am2 niagara unit specifications, Voice over packet option, Voice channel functions – Atec Ameritec-AM2-DE-DX-A-P-D User Manual

Page 5: Printouts and reports - call statistics, General characteristics, Controls, All models available in ce compatible versions, Voice replay option

Advertising
background image

Voice Channel Functions

Tone detectors and Circuit Switched Voice Functions

The AM2 Niagara product line consists of different

models providing physical interfaces for Analog
P-Phone, T1/E1 CAS, ISDN PRI/BRI and SS7.

Call Programs

Voice Path Confirmation

Digit Generators

Dialed digit strings are of unlimited length

Printouts and Reports - Call Statistics

Data is internally stored

General Characteristics

Voice Replay Option

This option provides up to 64 two second recorded

messages for AM2 Niagara Models AM2-A, AM2-B,
AM2-D, AM2-De and AM2-P

Line and channel path

•

10 user selectable single tone signals to send

verification --

unique channel ID tones

Circuit Switched Voice

•

Encoding Scheme:

for Digital AM2

0 : 1025 Hz 1 : 1150 Hz 2 : 1275 Hz 3 : 1400 Hz

Models):

4 : 1525 Hz 5 : 1650 Hz 6 : 1775 Hz 7 : 1900 Hz
8 : 2025 Hz 9 : 2150 Hz

•

64 user selectable single tone signals

Circuit Switched Data:

•

511 and 2047 BERT pattern test for 56 kBps or

(Digital AM2 Models

64 kBps channels

only):

•

511-bits pattern conforms to CCITT 0.153

•

2047-bits pattern conforms to CCITT 0.152

Packet Switched Data:

•

Up to 5 user selectable X.25 packets for

(AM2-DX/DXe and

confirmation

AM2-B only)

Voice Over Packet Option

General Specifications: The general specifications
define the features and capabilities that are common to
all AM2 Niagara Models.

Call Program Sets:

4 per unit, stored in non-volatile memory

Call Programs:

480 per unit, memory resident (640 for
AM2-B)

Features:

•

FeatureCall Graphical User Interface

•

Commonly used scripts supplied with unit

•

Custom scripts created and downloaded from

FeatureCall

System Start Modes:

•

Synchronous

•

Random

•

Manual

Trouble Encounter Response:

•

Continue

•

Call stop

•

Unit stop on trouble

Detectors:

•

Tone detectors are based on Digital Signal
Processors (DSPs) 1 per channel/line

Call Progress Detectors:

•

One detector per line or B-channel

•

Detects: dial tone, busy, reorder, ring,
ringback, supervision, wink

Path Confirmation

•

One receiver per line or B-channel

Receiver:

•

Frequency range: 10 to 2500 Hz

•

Accuracy: 1%, ± 10 Hz

•

Sensitivity: 0 dBm to -24 dBm

•

Response Time: 12.5 ms

Signaling Tone

•

One receiver per channel

Decoders:

•

Detects signaling tones for SOCOTEL

(AM2-D/De Only)

and ITU-T (CCITT) #5 signaling schemes

MF Receiver:

•

Decodes received MF digits DTMF, MFR1 MFR2

•

Response time: under 40 ms

•

Dynamic range: 35 dBm

Dial Pulse Generator:

•

Programmable dial speed: 1 pps to 999 pps

•

Dial break: 1 to 99%

•

Inter-digit time: 1 to 999 ms

Multitone

•

One digit generator per line

Digit Generators:

•

Dialing codes: MF R1, MF R2, DTMF

•

Default level: -9 dBm

•

Default frequencies: Nominal ± 0.005%

•

Programmability: Each line individually

programmable for level 0 dBm to

-50 dBm in 1 dB steps for each frequency

component

•

Programmable frequency range:

Up to 12.5% above or below nominal in

0.1% steps for each frequency component

Controls

Manual Reports:

•

Call statistics for each line or channel

•

Totals for all lines and channels

Automatic Reports

•

Prints automatically on the hour or every
half or quarter hour

•

Report categories are user selectable

Call Statistics for

•

Call attempt count

each originate line

•

Call completion count

or channel:

•

Delayed dial tone (AM2-A only)

•

No dial tone count (AM2-B only)

•

Delayed start signal count (Except AM2-A)

•

No start signal count (Except AM2-A)

•

No alert signal count

•

No voice path or B-channel confirmation count

•

Busy signal encountered count

• No answer signal count
• Ring time-out count (Except AM2-B,

AM2-DX/DXe)

•

Average dial tone delay

•

Average post dial delay

•

Custom code report count (programmable
in test script)

Call Statistics for each

•

Attempted calls count

terminate line or

•

Completed calls count

channel:

•

Custom code report count (programmable
in test script)

For each packet

•

Call Attempts

switched originate

•

Completed Calls

channel

•

Average connect acknowledge delay

(ISDN-BRI and

•

Slow connect acknowledge delay

ISDN-PRI only):

•

No connect acknowledge

•

Number of packets sent

•

Number of packets re-sent

•

Average packet delay

•

Custom code report count (programmable
in test script)

For each packet

•

Attempted calls count

switched terminate

•

Completed calls count

channel

•

Custom code report count (programmable

(ISDN-BRI and

in test script)

ISDN-PRI only):

Audio Monitor

•

Two volume controls adjust the stereo level of

Interface:

the internal loudspeaker

User Interface:

•

FeatureCall Graphical User Interface

•

Command line control via RS232C or Telnet,
(TCP/IP Ethernet)

RS232/V.24 Ports:

•

Two Serial Ports: Main / Auxiliary. Full duplex
on 3 wires. Provide GUI access, printer output,
remote control and chaining operations.

Ethernet:

•

10 Base-T interface

•

Telnet

•

TCP/IP

•

Configurable addressing via RS232 port: IP,
Subnet Mask, Gateway and Transmission Frame
Type

•

IEEE 802.3 or Ethernet II packet format

•

Maximum Transmission Unit (MTU) limit
1492 for IEEE 802.3, or 1500 for Ethernet II

•

48 bit Ethernet address

•

Class 1 Logical Link Control (LLC)

•

Address Resolution Protocol (ARP)

•

Internet Control Message Protocol (ICMP)

•

User Datagram Protocol (UDP)

PC Requirements

•

MS-DOS operating system 3.3 or

FeatureCall

higher

(Customer provided):

•

Microsoft Windows operating system
version 3.x and/or Windows ‘95

•

486DX or higher microprocessor

•

4 MB of memory, 8 MB recommended

•

Hard Disk space required for installation:
5 MB minimum

•

One 3.5” high density disk drive

•

SVGA or higher resolution monitor

•

Windows compatible mouse

•

RS232 19,200 Baud com:port

•

Ethernet TCP/IP Packet Driver (optional)

Dimensions:

•

16.8" Wide (730mm) x 7.2" High (185mm) x
11.5" Deep (295mm)

Power:

•

90 to 264 VAC, 47 to 65 Hertz, 65 Watts

Weight:

•

16.5 Pounds (7.5 Kilograms)

AM2 Niagara Unit Specifications

Voice Replay Option:

Adds VoP measurement capabilities to all models

except AM2-B, AM2-P

Voice Over Packet Option:

Real Time Error

•

Displayed or printed as they occur

Reports:

•

Details of the last 100 errors are stored

•

Error reports include: type, the line(s) or
channel(s), time

•

Error types recognized and reported:

•

Slow dial tone (AM2-A only)

•

No dial tone (AM2-A only)

•

Slow start (Except AM2-A)

•

No start (Except AM2-A)

•

No alert tone

•

Path or B-channel confirmation failed

•

No answer signal

•

Ring time-out (Except AM2-B and
AM2-DX/DXe)

•

Busy

•

Protocol cause values (ISDN-BRI,
ISDN-PRI & SS7 only)

•

Custom code report count
(programmable in test script)

Display:

•

Flat panel high resolution electroluminescent

screen with bit-mapped graphics capability

characters 8 x 16 pixels

Display Format:

•

40 characters by 16 lines

User Init:

•

Menu Driven

Keypad:

•

29 keys including 4 soft, curser keys, function

keys, numeric keys, and unit start and

finish keys

Voice Path Confirmation:

•

Golden Voice™ signal designed to pass
through vocoder

Packet Drop Out Count:

•

Count lost packets for frame sizes of
5, 10, 15, 20, 30, 40 and 100ms

Measure Delays Through

•

Round Trip Delay

Systems:

•

One Way Delays

Measure Clipping of Voice: •

Peak and average clipping of standard reference
with ± 10ms accuracy

7

8

Number of channels per option: •

64

Length of each phrase:

•

2 seconds, repeated until a new phrase or quiet
is selected

Number of phrases:

•

64 per option

(Voice Messages)
Phrase selection:

•

SENDVOX command in script

Voice output:

•

Selected voice signal is output on the channel
assigned in the Call Program

Output level:

•

Determined at the time of recording

Recording:

•

Created in a PC with a sound card and Ameritec
software

Required recording hardware:

•

Creative Labs Sound Blaster™ or equivalent,
16- bit audio card

•

EPROM Programmer

•

PC running DOS 3.x or higher

All Models Available in
CE Compatible Versions

Advertising