Atec Aemc-5600 - Manual (Page 2)

Digital Micro-Ohmmeter Model 5600 (pdf) 03/03
Technical Assistance (800) 343-1391 www.aemc.com 2 of 5
Specifications
ELECTRICAL
Range 2000µ
Ω
20m
Ω
200m
Ω
2000m
Ω
20
Ω
200
Ω
Display 1999 19.99 199.9 1999 19.99 199.9
Resolution 1µ Ω 10µ Ω 100µ Ω 1m Ω 10m Ω 100m Ω
Test Current 10A 1A 1A 100mA 10mA 10mA
Accuracy 0.25% typical 0.25% typical 0.25% typical 0.25% typical 0.25% typical 0.25% typical
0.5% max ± 2cts 0.5% max ± 1ct 0.5% max ± 1ct 0.5% max ± 1ct 0.5% max ± 1ct 0.5% max ± 1ct
Power Source Rechargeable 6V, 7Ah NiCD battery; built-in 110V/220V (47 to 450Hz) charger;
automatic shutoff after 4 minutes non-use
Battery Life 200µ
Ω
range: 200 to 300 8-second measurements
20-200m
Ω
ranges: 900 30-second measurements (approx.)
2000m Ω , 20-200 Ω ranges: 5000 30-second measurements (approx.)
Operating Voltage 4.5 to 7V DC
Recharge Time 14 hours from full discharge (approx.)
MECHANICAL
Display 2000-count, 7-segment LED
Connection Terminals accept 4mm banana plugs or 6mm (min) spade lugs
Operating Temperature 14° to 131°F (-10° to 55°C)
Storage Temperature -4° to 131°F (-20° to 55°C)
Dimensions 15.35 x 10.24 x 9.84" (390 x 260 x 250mm)
Weight 17 lbs 10 oz (8kg)
Case Fiberglass-charged polycarbonate with handle and removable lid,
watertight to IP534 (lid closed), IP520 (lid open)
Colors Safety-yellow case, gray faceplate
SAFETY
Safety Ratings Electrical: IEC 38, Supply voltage, Electromagnetic: IEC 801-2, Electrostatic discharge;
EN 61010, 300V, Cat. II, IEC 801-3, Electromagnetic fields; IEC 801-5, Electrical shocks,
Mechanical/environmental: IEC 529, Protection Index (IP); IEC 68.2.6, Vibration;
IEC 68.2.27, Shocks; IEC 68-2-29, Shake IEC 68.2.31, Knock over;
IEC 68.2.32, Drop test, Case Material: UL94
Overload Input Protection 380Vrms
Fuses Two high-interrupting capacity 8A 380V, 1 1 / 4 x 1 / 4"
CE Mark Yes
Features
• Four-terminal Kelvin resistance
measurement
• Up to 10A test current
• 0.25% basic accuracy
• 1m
Ω
resolution
• Direct reading, easy to operate
• Six selectable ranges
• Reverse polarity switch
• Overload and input fuse protection
• Automatic decimal point and zero
• Rechargeable NiCD battery with
integral charger (110/220V)
• Rugged field case for industrial
applications
Applications
• Contact resistance of breakers
and switches
• Wire to terminal connections
• Winding resistance of motors
and transformers
• Resistance on electric motors
• Aircraft and rail bonds
• Grounding connections
• Battery strap measurements
Test Equipment Depot www.testequipmentdepot.com
99 Washington Street 800-517-8431
Melrose, MA 02176-6024 781-665-0780 FAX