Atec AEMC-6470B - Manual (Page 6)

6 www.aemc.com Technical Assistance (800) 343-1391
DataView
®
Functional Displays
Bond test setup screen — operator can choose two or four
wire test method.
4-Point Fall-of-Potential test setup screen — operator can
select test voltage, manually select the test frequency or have
the instrument automatically select the best test frequency.
Distance for Y electrode can also be entered manually and
a Fall-of-Potential plot generated. Lead Compensation is
automatically provided in this test mode.
3-Point Fall-of-Potential test setup screen — operator can
select test voltage, manually select the test frequency or have
the instrument automatically select the best test frequency.
Distance for Y electrode can also be entered manually and a
Fall-of-Potential plot generated.
Soil resistivity test setup screen — operator can select either
the Wenner or Schlumberger test method, select test voltage and
frequency and program the spacing between electrodes in either
feet or meters.