Double-ridged waveguide horn with pre-amplifier, Emc antennas, Electrical specifications – Atec ETS-Lindgren-3116C-PA User Manual
Page 2: Physical specifications, Model 3116c-pa typical antenna factor and gain
Phone + 1.512.531.6400
l
l
www.ets-lindgren.com
Offices in the US, Brazil, Germany, Finland, UK, France, India, Japan, Singapore, China, Taiwan
Information presented is subject to change as product enhancements are made. Contact ETS-Lindgren Sales Department for current specifications.
4/13 - PDF/RR © 2013 ETS-Lindgren REV A
Electrical Specifications
MODEL
FREQUENCY
VSWR
MAXIMUM CONTINUOUS
IMPEDANCE
CONNECTOR
RANGE
(AVG)
POWER
(NOMINAL)
TYPE
3116C-PA
18 GHz to 40 GHz
N/A (Rx Only)
N/A (Rx Only)
50 Ω
K (2.92 mm, Female)
Physical Specifications
MODEL
LENGTH*
WIDTH
HEIGHT*
WEIGHT
3116C-PA
14.2 cm
26.9 cm
22.1 cm
1.4 kg
5.6 in
10.6 in
8.7 in
3.0 lb
EMC Antennas
Model 3116C-PA
Double-Ridged
Waveguide Horn
with Pre-Amplifier
Model 3116C-PA Typical Antenna Factor and Gain
*Includes stinger and pre-amplifier box.