Atec Agilent-N5264A - Manual (Page 12)

External Monitor Information
Description Typical Performance
VGA Video Output
Connector
15-pin mini D-Sub; Drives VGA compatible monitors
Devices Supported: Resolutions:
Flat Panel (TFT)
1024 X 768, 800 X 600, 640 X 480
Flat Panel (DSTN)
800 X 600, 640 X 480
CRT Monitor
1280 X 1024, 1024 X 768, 800 X 600, 640 X 480
--
Simultaneous operation of the internal and external
displays is allowed, but with 640 X 480 resolution
only. If you change resolution, you can only view the
external display (internal display will "white out").
Test Set IO
25-pin D-Sub connector, available for external test
set control.
Power IO
9-pin D-Sub, female; analog and digital IO
Handler IO
36-pin parallel I/O port; all input/output signals are
default set to negative logic; can be reset to positive
logic via GPIB command.
Trigger Information
Description Typical Performance
Trigger In/Meas Trigger
Nominal Input Impedance
5K Ohms
Minimum Pulse Width
1 us
DC Damage Level
5.5 volts
Drive Voltage
TTL (0, +5.0) Volts