Atec AEMC-SR651 User Manual
Ac current probe model sr651, Features, Applications
AC Current Probe Model SR651 (pdf)
Rev. 03
10/03
Technical Assistance (800) 343-1391
1 of 4
AC Current Probe
Model SR651
The Model SR651 is designed for use
in industrial and utility environments.
The unique ergonomic design allows it
to easily clamp onto cables or small
bus bars. It is built to the highest safety
and performance standards including
the CE Mark and is UL approved.
Excellent transformation and low
phase shift, plus a broad frequency
response, permit accurate measure-
ments of current for power and power
quality measurements. The high
quality magnetic cores and uniform
windings provide sensitivity for very
low level current measurements, as
well as measurements up to 1200A
AC
.
The Model SR651 provides an
accurate voltage output of 1mV/A.
This voltage output enables
instruments without current ranges to
measure, display log currents through
an AC voltage range or measure very
low AC.
Features
•
Measurement range of
100mA to 1200A
AC
•
Large jaw opening accommodates
conductors up to two 500MCM
conductors
•
Improved ergonomic design and
easy operation
•
Conforms to EN 61010, 600V Cat. III
safety standard
•
Low phase shift for power
measurements
•
Available with mA or mV
output signals
•
Designed for DMMs, recorders,
loggers, oscilloscopes, power and
harmonic meters
•
CE Mark
Applications
•
Power quality measuring
•
Low industrial loads
•
Measuring around cable bundles
•
Power load monitoring
•
Waveform analysis