Atec Eagle-Eye-LB-75-200-3-5-400 - Manual

Rating: 75 kW, 94 kVA at 200 Volts AC, 3 Phase, 400 Hertz, 217 Amps per Phase
Tolerance: 3%
Power Factor: 1.0
Duty Cycle: Rated for continuous generator test operation.
Load Connections: Quick disconnect power connections 3 Phase 4 Wire “wye” (A,B,C,N)
Load Steps: 5, 10, 10, 25, & 25 kW each at 200 Volts AC 3 phase (75 kW total)
Easy to use operator control panel with:
Digital metering of current and voltage
Status indicating lights:
Air-flow indicating red and green lights
Over-temperature red light
Master on/off switch
Fan on/off switch
Master Load switch
Individual load step switches
Safety Features:
Fast acting branch circuit fuse protection on all 3 phases of all load steps
Fused 120V control circuit
Air pressure switch to prevent load from being applied if loss of cooling air is detected
Over-temperature sensor automatically removes load if an over-temperature condition is detected
Blower Motor circuit is protected by current overload protection.
Operator warning and caution statements are located on appropriate access panels and doors.
Control Power:
Cooling System: Integrally mounted, high velocity, low noise, 110-120V AC 1 phase 50/60 Hz. fans provide the
necessary cooling air for the resistor load elements.
Construction:
Rugged construction all metal frame
Durable powder coat finish
Lifting handles
Stainless steel exterior fasteners
Horizontal Airflow
Front control guards / handles
Unit Dimensions: 14" wide x 26" long x 22" tall
Weight: Approx. 75 lbs.
Optional Features Available:
Mating Anderson plug set
Cable set
Storage cover
Wheel kit
Padded hard case with wheels and telescoping handle
Eagle Eye LB-75-200-3-5-400 Portable Resistive Load Bank Specifications
110-120 VAC, 1 Phase, 50/60 Hz, required for control circuit operation. Line cord provided.