Atec Anritsu-MP1763C-64C-64D - Manual (Page 4)

4
q Internal Clock (Option 01)
Can be set in units of 1 kHz over the range from 50 MHz to 12.5
GHz
w Programmable Patterns
• 8-Mbit programmable pattern (can set six STM-64 frames)
• 4-Mbit alternate pattern
• Zero substitution pattern
• PRBS pattern from 2 7 – 1 to 2 31 – 1 selectable and its mark ratio
can be varied.
e Synchronous Output
The 1/64 clock or pattern SYNC selectable.
The trigger position variable for the pattern SYNC
MP1763C Pulse Pattern Generator
r DATA Output
DATA/DATA complementary output with back termination
t CLOCK Output
CLOCK 1/CLOCK 1, CLOCK 2 (3 systems)
CLOCK 1/CLOCK 1 with back termination
y Parallel Output
Useful for testing an 8:1 MUX
(changeable to 1/4 speed output with option)
• 1/8 parallel output is standard. 1/4 parallel output (Option 03) or
1/4 differential output (Option 08) can be selected exclusively.
• It can be used as a data generator for evaluation of MUX
devices, WDM transmission equipment, high-speed buses, back-
planes, etc.
q
w
e r t
y
MP1763C/1764C_E 04.6.24 3:02 PM Page 4