Key characteristics – Atec Agilent-N6030A User Manual

Page 7

Advertising
background image

7

Sample clock

Internal

Fixed 1.25 GS/s

Internal clock output

+3 dBm nominal

External clock input

Tunable 100 MS/s to 1.25 GS/s

External clock input drive level

+5 to –15 dBm typical

Phase noise characteristics:

1 kHz :

-95 dBc/Hz

10 kHz :

-115 dBc/Hz

100 kHz :

-138 dBc/Hz

1 MHz :

-150 dBc/Hz

Noise Floor

-150 dBc/Hz

Accuracy

Same as 10 MHz timebase input

Frequency reference

Input drive level

+2 to +12 dBm into 50 Ω

(+2 dBm nominal)

Waveform length

8 MS per channel

(16 MS with Option 016)

Minimum waveform length

128 samples

Waveform granularity

8 samples

Segments

1 to 32 k unique segments can be

defined consisting of waveform start

and stop address, repetitions, and

marker enable flags.

Segment loops

A total of 1 million (2

20

) loops can

be defined for each segment. Loops

can be configured to advance in one

of three modes:

• Single

The segment loop plays once

and waits at the end of the loop

for a trigger.

• Continuous

Segment loop is repeated

continuously until a trigger is

received.

• Auto

Automatically advances to the

next segment after completing

the specified number of loop

repetitions.

• Repeat

The waveform loop repeats until

the number of waveform loop

repetitions is met.

Sequences

Up to 32 k total unique waveform

sequences can be defined. A

sequence is a contiguous series of

waveform segments.

Advanced sequencing

Enables users to build and playback

scenarios, which are comprised of

one or more sequences.

Scenarios

1 to 16 k pointers can be assigned

to play pre-defined sequences.

Sequence play begins with the

first sequence entry and continues

uninterrupted until the last entry

is played. The table repeats until

stopped.

Key characteristics

(continued)

Advertising