Atec Agilent-E4432A-1E5 - Manual (Page 5)

DECT (Option UN3 or UN4)
Modulation Format: GFSK
Data Rate (default):
1,152 kbits/sec
Adjustment Range: 922 to 1209.6 kbits/sec
Filter: Gaussian
Default Value: BT = 0.5
Range (BT in 0.5 steps): 0.2 to 0.7
Deviation Accuracy:
17 6 (1.5, typical)
Channel Spacing: 1.728 MHz
Supported Burst Types: Custom, Dummy B 1 & 2, Traffic B,
Low Capacity
17 Specifications apply for the frequency range, data rates and filter factors
(BT) specified at power levels >=+7 dBm.
GSM (DCS1800/PCS1900) (Option UN3 or UN4)
Modulation Format:
GMSK
Data Rate (default): 270.83 kbits/sec
Adjustment Range: 163 to 300 kbits/sec
Filter: Gaussian
Default Value: Bbt = 0.3
Range (BT in 0.5 steps):
.02 to 0.7
Global Phase Error: 18 (rms/pk) 1°/4°
0.5°/1.75° (typical)
Channel Spacing: 200 kHz
Adjacent Channel Power
18 (ACP)
(Low ACP Mode, dBc, typical)
[see table 9]
Supported Burst Types: Custom, Normal, FCorr, Sync,
Dummy, Access
18 Specifications apply for the frequency range, data rates and filter factors
(alpha) specified at power levels >=+7 dBm.
19 The "channel spacing" determines the offset size of the adjacent and alternate
channels: Adjacent Channel Offset= 1 x channel spacing, 1st Alternate Channel =
2 x channel spacing, 2nd Alternate Channel = 3 x channel spacing, 3rd Alternate
Channel = 4 x channel spacing.
Coherent Carrier Out 20
Range: 250 MHz to maximum carrier frequency
Level: 0 dBm ±5 dB, typical
Impedance: 50 ohms
20 Coherent carrier is modulated by FM or phase modulation when enabled.
Internal Modulation Source
Provides FM, PM, and AM Modulation Signals and LF Out
Waveforms: sine, square,ramp, triangle, pulse, noise
Rate Range
Sine: 0.1 Hz to 50 kHz
Square, Ramp, Triangle: 0.1 Hz to 10 kHz
Resolution: 0.1 Hz
Frequency Accuracy: 0.005%