Atec Acterna-DSAM-1500-2500-2600-3600 Quick-Start Guide - Manual (Page 6)

Power Component Specifications
44 DSAM Product Family Quick-Start Guide Rev. F
Power Component Specifications
Table 4 Power Component Specifications
Item Description
Charger Module
Input
Operational voltage range 11 to 14VDC (nominal = 12V DC)
Input protection Reverse polarity; ESD
Connector 2.5 mm coaxial
Environmental
Operational temperature range -20 to +50 °C (0 to +120 °F)
Storage temperature range -20 to +80 °C (0 to +176 °F)
High fast-charge inhibit range 60 °C (± 5 °C) (140 °F)
Low fast charge inhibit range 0 °C (± 5 °C) (+32 °F)
Humidity range 0 to 95% RH (non condensing)
Output - NiMH Battery
Battery life 3 hours (typical)
Fast charge rate 1000mA ± 10% @ 7.2V
Maximum charge time Up to 5 hours
Output - Li-Ion Battery
Battery life 4.5 Hours (typical)
Fast charge rate 1000mA ± 10% @ 7.4V
Maximum charge time Up to 6.5 hours
Power Supply Module
Input
AC Input Voltage Range 90 - 264 VAC
AC Input Frequency 47 - 63 Hz
Output
Output Voltage +12VDC
Maximum Load Current 2A