Atec JDSU-C8555 - Manual (Page 5)

1.5M (T1)
Modes of Operation
Terminate, Monitor
Framing
D4, ESF, SLC-96, Unframed
Test Patterns
All 1s, All 0s, 2^15-1*, 2^20-1*, QRSS, User Bit (3 -32 bits),
User Byte (2-128 Hex Digits), Round Trip Delay, 1:7, 2 in 8, 3 in
24, MIN/MAX,T1 DALY, 55 OCTET,T1-2/96,T1-3/54,T1-4/120,
T1-5/53
*ANSI and ITU implementations are supported
Error Insert
Bit Error
Single, Rate, Multiple
CRC Single
BPV Single
Frame Single, 2
Frequency Offset
+/- 100ppm
Tx LBO
0 dB, -7.5 dB, -15.0 dB, -22.5 dB
Results
Signal Category
LOS/Signal Loss Count, LOS/Signal Loss Seconds, Rx Frequency,
Rx Frequency Deviation, Rx Frequency Max Deviation,Tx
Frequency,Tx Timing Source, Rx Level (Vpp), Rx Level (dBdsx),
BPVs, BPV Rate, BPV Error Seconds, Ones Density State Count
Frame Category
LOF/Frame Sync Losses, LOF/Frame Sync Loss Seconds, Frame
Error Count, Frame Error Rate, AIS Seconds, RAI Seconds, CRC
Error Count, CRC Errored Seconds, CRC Error Rate
Logic Category
LSS/Pattern Sync Losses, LSS/Pattern Sync Loss Seconds, Bit
Error/TSE Count, Bit Error/TSE Rate
Performance Results
G.821, G.826 (ISM/OOS), M.2100,T1.231,T.510 (ISM/OOS)
Optical Specifications for 10 Gb/s
Port Bank
Technologies Include - STM-64, OC-192, and 10 GigE LAN/WAN
Connectors
1 - 1550nm Tx
1 - 1310nm Tx
1 – 1310nm and 1550 nm Rx
1 - 850nm Tx
1 - 850nm Rx
Connector types - FC, SC, ST, LC, DIN
Transmitter (1550 nm and 1310 nm)
Clock frequency accuracy Tx
+/- 1.5 ppm +/- 1 ppm/year
Receiver (1550 nm and 1310 nm)
Rx wavelength range (1310nm, 1550nm Rx) 1100 to 1600 nm
Rx clock measurement accuracy +/- 1.5 ppm +/- 1 ppm/year
Rx level accuracy (all wavelengths, all rates)
+/- 3dB
Transmitter (850 nm)
Clock frequency accuracy Tx
+/- 1.5 ppm +/- 1 ppm/year
Receiver (850 nm)
Rx wavelength range
840 - 860 nm
Rx clock measurement accuracy +/- 1.5 ppm +/- 1 ppm/year
Rx level accuracy
+/- 3 dB
Optical Specifications for Primary
Port Bank
Interfaces Include - 2.5 Gb/s, GigE, 622 Mb/s, and 155 Mb/s
Connectors
1 – 1310 nm 2.5 Gb/s, 1 Gb/s, 622 Mb/s, 155 Mb/s Tx
1 – 1550 nm 2.5 Gb/s, 1 Gb/s, 622 Mb/s, 155 Mb/s Tx
1 - 1310/1550 nm 2.5 Gb/s, 1 Gb/s Rx
1 - 1310/1550 nm 622 Mb/s, 155 Mb/s Rx
1 - 850 nm 1 Gb/s Tx
1 - 850 nm 1 Gb/s Rx
Connector Types - FC, SC, ST, LC, DIN
Transmitter (1310 nm and 1550 nm)
Clock frequency accuracy Tx +/- 1.5 ppm +/- 1 ppm/year
Receiver (1310 nm and 1550 nm)
Rx wavelength range 1270 nm to 1600 nm range
Rx clock measurement accuracy +/- 1.5 ppm +/- 1 ppm/year
Transmitter (850 nm)
Clock frequency accuracy +/- 1.5 ppm +/- 1 ppm/year
Receiver (850 nm)
Rx wavelength range 770 to 860 nm
Rx clock measurement accuracy +/- 1.5 ppm +/- 1 ppm/year
Rx level accuracy (all wavelengths, all rates)
+/- 3 dB
Optical Specifications for Secondary
Port Bank
Technologies Include - GigE
Connectors
1 – 1310 nm 1Gb/s Tx
1 – 1550 nm 1Gb/s Tx
1 – 1310/1550 nm 1G Rx
1 – 850 nm 1Gb/s Tx
1 – 850 nm 1Gb/s Rx
Connector Types - FC, SC, ST, LC, DIN
Transmitter (1310 nm and 1550 nm)
Clock frequency accuracy +/- 1.5 ppm +/- 1 ppm/year
Receiver (1310 nm and 1550nm)
Rx wavelength range 1100 nm to 1600 nm
Rx clock measurement accuracy +/- 1.5 ppm +/- 1 ppm/year
Rx level accuracy (1310 nm and 1550 nm)
+/- 3dB
Transmitter (850 nm)
Clock frequency accuracy +/- 1.5 ppm +/- 1 ppm/year
Receiver (850 nm)
Rx wavelength range 770 nm to 860 nm
Rx clock measurement accuracy +/- 1.5 ppm +/- 1 ppm/year
Rx level accuracy (1310 nm and 1550 nm)
+/- 3dB
Electrical Specifications
Electrical rates supported by the Transport Module
DS1 1.544
DS3 44.736
E1 2.048
E3 34.368
E4 139.264
STS-1
51.84
STM-1e 155.52
10Base-T Ethernet
10
100Base-T Ethernet 100
1000Base-T Ethernet 1000
TRANSPORT MODULE